PROFILT offer a wide variety of pleated media, filter sizes and end cap configurations to provide customers with the preferred cartridge for their specific application.
The pleated configuration allows for an increased surface area resulting in a greater dirt loading capacity.
Most applications will benefit from some form of gradient filtration. Stepping from coarse to fine to polishing modes extends the active life of each level of filtration. Regular maintenance and change outs of the lower-cost pre-filters is a proven best practice for protecting the life of the more expensive final filters.
Our range provides for absolute and nominal rated liquid efficiency with ratings from 0.2 to 100 micron and cartridge lengths ranging from 10 – 60 inches.
PROFILT are the authorized distributor for Graver Technologies
End Cap Configurations
GFC™ Series
Micro-fiberglass pleated filter cartridges with polypropylene hardware
GFP™ Series
Micro-fiberglass pleated filter cartridges with polyester hardware
High Flow Series
Large geometry, all polypropylene pleated filters for high flow applications
High Flow GF Series
Large geometry, pleated filters with micro-fiberglass media for high flow applications
High Flow RF Series
Absolute retention ratings from 1 to 100 microns
PMA™ Series
Absolute rated, value priced, pleated polypropylene filter cartridges
PMC™ Series
Nominal rated, value priced, pleated polypropylene filter cartridges
PME™ Series Filter Cartridges
Absolute” Rated Economical Pleated Filter Cartridges
QCR™ Series
Cyst reduction rated pleated polypropylene filter cartridges
QMA™ Series
Premium pleated polypropylene filter cartridges
QMC™ Series
Nominal rated, multi layer pleated polypropylene filter cartridges
QXL™ Series
Hybrid pleated/depth pleated polypropylene filter cartridges